LumaGuard Eco Solar Motion Sensor LED Security Light

LumaGuard Eco Solar Motion Sensor LED Security Light — a fully solar-powered LED motion sensor light designed to illuminate and secure outdoor spaces while reducing energy consumption and environmental impact.

• Energy efficient: 100% solar powered — no cables or external batteries required; helps reduce electricity usage and carbon footprint.
• Easy installation: Mount on any wall without wiring; screws for mounting are included where applicable.
• Weather-resistant: IP65 water resistance and heatproof construction for reliable outdoor performance in varied conditions.
• Three intelligent lighting modes: Versatile options to suit security and ambiance needs.
• Security and ambiance: Suitable for bright security lighting or softer garden/pathway illumination.

Three intelligent lighting modes

• Mode 1 — Motion & light sensor: Activates at 100% brightness when motion is detected in darkness; automatically turns off after 25–30 seconds of no motion.
• Mode 2 — Dim light + motion detection: Provides low-level illumination at night, increases to 100% when motion is sensed, then returns to dim mode after 25–30 seconds.
• Mode 3 — Constant 100% brightness: Stays fully lit in darkness regardless of motion.

Specifications

• LED: 100 LEDs
• Power: 6W, Luminous flux: 600LM
• Material: ABS plastic — durable and lightweight
• Solar panel: 5.5V polysilicon
• Battery: 1800mAh Lithium
• Detection angle: 120º
• Detection range: 3–5 meters
• Waterproof rating: IP65 (outdoor use)
• Size: 130 × 90 × 55 mm (5.12 × 3.55 × 2.17")
• Performance statistics: Power output 6W — Luminous flux 600LM — Battery capacity 1800mAh — LED count 100

Installation and setup

Choose a mounting location that receives direct sunlight for reliable charging. Mount the light on a wall using the supplied screws (if applicable); no wiring is necessary. Before first use, expose the solar panel to direct sunlight for at least 12 hours to ensure optimal initial charging.

Important notes:

• Charging: For best results, place the light in direct sunlight for at least 12 hours before first operation.
• Placement: Install where sunlight exposure is ample to maintain charging efficiency over time.
• Brightness adjustment: Output and run time depend on solar charge — stronger sunlight results in faster charging and brighter lighting.

Package contents

• 1 x Solar motion sensor light; screws for mounting (if applicable).